This guide will show you how to replace the Apollo Light’s fender if it’s broken or defective.
You will need the following tools for this repair:
- Phillips' head screwdriver
STEP 1: Locate the fender screws
The Light’s fender is secured with four bolts on the rear fork of the scooter. Start by locating these bolts. The screw’s locations are indicated below.
STEP 2: Remove fender screws
Insert a Phillips' head screwdriver into the leftmost and uppermost bolt. Turn counterclockwise to loosen. Remove screw and set aside. Repeat with the remaining 3 screws.
STEP 3: Remove fender
Lift the fender outward and towards the back. The fender should come cleanly off the rear fork.
STEP 4: Hold new fender in place
Align the screw holes in your replacement fender with the holes in the fork.
STEP 5: Reinsert bolts and tighten
Reinsert the bolts into the screw holes, starting with the leftmost. Tighten with a Phillips' head screwdriver by turning clockwise. Repeat with the remaining 3 screws.
You’re done! You have successfully removed and replaced your Light’s fender.
For any additional questions, submit a request.