This guide will show you how to replace your Apollo City’s fender if it’s broken or defective.
You will need the following tools for this repair:
- Phillip's head screwdriver
STEP 1: Locate the fender screws
The City’s fender is secured with four bolts on the rear fork of the scooter. Start by locating these bolts, including the ones behind the deck. The screw’s locations are indicated below.
STEP 2: Remove fender screws
Insert a 2.5mm Allen key into the leftmost bolt. Turn counterclockwise to loosen. Remove screw and set aside. Repeat with the remaining 3 screws.
STEP 3: Remove fender
Lift the fender outward and towards the back. The fender should come cleanly off the rear fork.
STEP 4: Hold new fender in place
Align the screw holes in your replacement fender with those in the fork.
STEP 5: Reinsert bolts and tighten
Reinsert the bolts into the screw holes, starting with the leftmost. Tighten with a 2.5mm allen key by turning clockwise. Repeat with remaining 3 screws.
Your fender has now been removed and reinstalled. You’re done!
For any additional questions, submit a request.